One Skein Fingerless Gloves

From Knitculture, this pattern is quick and easy. It adapts well to other types of yarn. These will make great holiday gifts....

Finished measurements: Will fit 7.5 to 8 inch woman’s hand

Materials:

1 skein Tanglewood Cashmere or any worsted weight yarn

 

US size 7 double pointed needles or size

needed to obtain Gauge. Take time to check your gauge!

Gauge: 20 sts = 4 inches in stockinette stitch

 

Instructions:

With double point size 7 needles cast on 34 stitches. Divide stitches on 3 dpns as follows

11 on needle 1, 11 on needle 2 and 12 on needle 3. Join to knit in the round but be very

careful not to twist. Work in a k1, p1 ribbing for 3 ¾.

 

Gusset:

Row 1: k1, m1, k to last 2 sts, k1 m1, k1

Row 2: P

Row 3: P1, k1, m1, k1, *p1, k1 repeat from * to last 3 sts, p1, m1, p1, k1

Row 4: *p1, k1 repeat *

Row 5: K3, m1, k to last 4 sts, k1, m1, k to end

Row 6: P

Row 7: P1, k1, p1, k1, m1, k1, *p1, k1 repeat from * to last 5 sts, p1, m1, p1, k1,

P1, k1

Row 8: *P1, k1 repeat from *

Row 9: K5, m1, k to last 6 sts, k1, m1, k to end

Row 10: P

Row 11: P1, k1, p1, k1, p1, k1, m1, k1, *p1, k1 repeat from * to last 7 sts, p1, m1,

P1, k1, p1, k1, p1, k1

Row 12: P1, *k1, p1, repeat from * to the last 7 sts. Slip the next 14 sts to a stitch

Holder. Then, cast on 2 sts using the thumb cast on method.

 

 

Continue in pattern, except for 14 stitches on holder, as follows:

Row 1: K

Row 2: P

Row 3: *K1, p1, repeat from *

Row 4: *K1, p1, repeat from *

Repeat rows 1-4 five times. Knit one round, then bind off loosely purlwise.

 

 

For Thumb: Divide 14 stitches on the holder between 3 dpns as follows: 5 sts on needle

1, 5 sts on needle 2 and 4 sts on needle 3. Pick up 2 stitches from hand section where the

thumb section is. You should now have 16 stitches.

Next:

Row 1: K

Row 2: P

Row 3: *K1, p1, repeat from *

Row 4: *K1, p1, repeat from *

Repeat these 4 rows twice. BO loosely. Sew in loose ends…..enjoy!

Pucker Up with Kiss Kiss Yarn!

Novelty yarn is fun, fun, fun...and fast to knit up super cool scarves! This scarf pattern uses only one skein of Filatura Di Crossa Kiss Kiss yarn.

 

 

SIZE One size
MATERIALS
• 1 hank Filatura Di Crosa KISS
KISS 65% acrylic, 20% wool, 15% polyester (3.5oz/1OOg; 11yds/1Om) in color #15 coral reef
• One pair size 7 (4.5mm) needles
KNITTED MEASUREMENTS
6" in circumference x 52" long/15cm x
132cm
GAUGE
Gauge is not essential to this project.
NOTES:
HOW TO WORK WITH KISS KISS
This is a ladder-type yarn with
decorative boucle pigtails strung along a ladder (or railroad track) of yarn, into which the pick-up east-on and knit stitches are worked.
You will work into every space between
rungs of the ladder (please note that
there may be 2 or 3 strands of yam [joining the side rails of the ladder] between the wider openings- the wider opening counts as the pick-up area).
To cast on, you will "thread" the tip of the needle into successive openings in the ladder, picking up your "east-on" stitches. SCARF
"Cast on" 3 stitches, as instructed above. Turn needle.
Row 1 * Place the tip of the right-hand needle into

the first east-on stitch and then pick up the next
space along ladder of the yarn by wrapping it around the needle as if to knit. Pull the new stitch through

the "east-on" stitch; repeat from * across row- 3

stitches. Turn needle.

Continue to repeat Row 1, until you are near the end of the hank of yarn.NOTE: The scarf will naturally form a spiral.

Bind off all stitches knitwise.
 
 

It's a Cowl...No, It's a Shrug!

This two-fer from Lion Brand Yarn will update your fall wardrobe in sooo many ways!

SIZE:

 

 

One Size

Finished Width

 

About 12 in. (30.5 cm)

Finished Circumference

 

About 63 in. (160 cm)

MATERIALS

• 825-200 Lion Brand AmazingTM Yarn: Aurora 4 Balls

• Knitting Needles- Size 9 [5.5 mm]

• Large-Eye Blunt Needles

• Additional Materials 5 Dritz sew-on snaps, size 30 mm

Large-eyed needle that will fit through holes on snaps

GAUGE20 sts = 4 in. (10 cm) over pattern.

BE SURE TO CHECK YOUR GAUGE. When you match the gauge in a pattern, your project will be the

size specified in the pattern and the materials specified in the pattern will be sufficient. If it takes you

fewer stitches and rows to make a 4 in. [10 cm] square, try using a smaller size hook or needles; if

more stitches and rows, try a larger size hook or needles.

NOTES:

1. Piece is worked as a rectangle.

2. Snaps are sewn to the rectangle, then the ends are seamed.

3. The shape and the snaps provide multiple wearing options! Leave the piece unsnapped for a lush

circular cowl. Snap a few of the snaps for a close fitting cowl. Snapping all of the snaps will create

armholes. Slip your arms through to make a shrug!

COWL/SHRUGCast on 61 sts.

Row 1:

 

K1, *p1, k1; rep from * to end of row.

Row 2:

 

P1, *k1, p1; rep from * to end of row.

Rep Rows 1 and 2 until piece measures about 63 in. (160 cm) from beginning.

Bind off.

FINISHING

Sew Snaps

Note:

 

 

We sewed the snaps in place with straight stitches and a strand of yarn.

Unsnap each snap into 2 pieces. You will sew all 5 of the same piece to one section of the piece, and all 5 of the remaining pieces to a second section of the piece.

The piece is reversible, but for purposes of sewing the snaps in place, designate one side as the right side, the other as the wrong side.

Following diagram for placement, sew 5 matching snap pieces to the right side of the piece. Still following the diagram for placement, sew the remaining 5 snap pieces to the wrong side of the piece.

Sew ends together to form a tube.

Weave in ends.

Funky Furry Hat!

You will be so ready for winter in this Faux-Fur hat by Tahki Yarns!

SIZE One Size

MATERIALS

• 2 balls Tahki Yarns COYOTE, 51% wool, 46% acrylic, 3% nylon (1.75oz/50g; 27yds/25m) in color #04 slate

• One pair size 13 (9mm) needles OR SIZE TO OBTAIN GAUGE

• Yarn needle

KNITTED MEASUREMENTS Cap Circumference 20"/51em

GAUGE 7 sts and 12 rows
= 4"/1Ocm in Garter stitch

TAKE TIME TO CHECK GAUGE

SPECIAL ABBREVIATIONS K2tog: Knit 2 together- Knit 2 sts together through the front loops.

PATTERN STITCH

Garter Stitch Knit every row.

CAPCast on 36 sts.

Work in Garter st until piece measures 6½" from beg, end with a WS row. Shape Crown

Dec Row 1 (RS)
K2, [k2tog, k3] 6 times, k2tog, k2 – 29 sts rem.

Knit 1 row. Dec Row 2

[K2, k2tog] 7 times, k1 – 22 sts rem.

Knit 1 row.
Dec Row 3  [K1, k2tog] 7 times, k1 – 15 sts rem.

Knit 1 row. Dec Row 4
 [K2tog] 7 times, k1 – 8 sts rem.

Cut yarn, leaving a long tail. Thread tail through remaining sts and pull to close. Knot to secure. FINISHING
Sew back seam. Weave in ends. Pull tufts of Coyote yarn to RS for a fuller fur look.
 
 

Shrug That Makes a Statement

This Tahki Yarn shrug pattern is all in the yarn! You can rock this out with a pair of jeans or put it over that basic black work dress!

SIZES Small (Medium, Large, XL, 2X, 3X)

MATERIALS

• 3 (4, 5, 6, 6, 8) skeins Tahki Yarns RINGO, 60% wool, 40% acrylic (3.5oz/100g; 33yds/30m) in color #05 lucy in the sky

• One pair size 7 (4.5mm) needles  
  OR SIZE TO OBTAIN GAUGE

Stitch holders
• Yarn needle

• One button, 1"/25mm diameter
KNITTED MEASUREMENTS
Bust 40 (48, 48, 56, 56, 64)"/101.5 (122, 122, 142, 142, 162.5)cm

Length  10 (11, 12, 13, 14, 15)"/25.5 (28, 30.5, 33, 35.5, 38)cm

GAUGE 4 sts and 4 rows = 4"/10cm in Pattern stitch
TAKE TIME TO CHECK GAUGE

 
NOTE:
Ringo is a thick-and-thin yarn constructed as a series of linked chains – some links are thick and others thin. Cast on is worked by picking up a loop of one of the chain links. Knit sts are worked by inserting RH needle into stitch on LH needle and from back to front on designated thick or thin chain on yarn strand (1 or 2 loops of chain as indicated by pattern) through st on needle. Whenever a st is formed by picking up 2 loops,
those 2 loops count as 1 st in the next row. Ringo is a unique yarn that is easier to knit with the yarn held in the left hand while working. Stitches may slip off of needle easily so you may find it easier to work on a circular needle, where sts cannot slip from either end of needle. SHRUG is worked in two pieces from lower edge of Sleeve to center of Back. Pieces are sewn together at center of Back. For instructional videos on working with RINGO, please visit www. tahkistacycharles.com/ringo.

SPECIAL TERMS & ABBREVIATIONS

Cast On
Cast on is worked by inserting tip of RH needle into one loop of chain in the yarn from back to front and slipping on to needle (1 st cast-on), *skip one chain, slip loop from next chain of yarn onto needle; rep from * to cast on designated number of sts. For the cast on, it does not matter if the chain loop is thin or thick.

K1T *Holding yarn behind LH needle with your left hand, insert tip of RH needle first into st on LH needle, then skipping thick chains on yarn, into two loops of next thin chain, pull loops through st on LH needle and slip st from needle; rep from *.

K2tog Holding yarn behind needle with your left hand, insert tip of RH needle first into front loops of next 2 sts on LH needle, skipping thick chains on yarn, into two loops of next thin chain, pull loops through sts on LH needle and slip st from needle. On next row, stitch will appear as 2 loops on LH needle but both loops count as 1 st.

K1L Holding yarn behind needle with your left hand, *insert tip of RH needle first into st on LH needle, then skipping thick and thin chains on yarn for approx. 1½", into two loops of next thin chain, pull loop through st on LH needle until st is approx. 1½" tall and slip st from needle; rep from *. On next row, stitch will appear as 2 loops on LH needle but both loops count as 1 st.

K2togL Holding yarn behind needle with your left hand, insert tip of RH needle first into front loops of next 2 sts on LH needle, then skipping thick and thin chains on yarn for approx. 1½", into two loops of next thin chain, pull loop through st on LH needle until st is approx. 1½" tall and slip st from needle; rep from *. On next row, stitch will appear as 2 loops on needle but both loops count as 1 st.

M1LWork 2 K1L in same st.Bind Off
*K1, skip next 3 chains on yarn, k1 in next thick or thin chain and bind off previous st; rep from *.

SHRUG

LEFT SLEEVE

Cast on 24 (28, 32, 36, 40, 44) sts.

Foundation Row
[K2tog] across – 12 (14, 16, 18, 20, 22) sts.

Row 1 (RS)
K1L in each st across – 12 (14, 16, 18, 20, 22) long sts.

Row 2
K1T in each st across – 12 (14, 16, 18, 20, 22) short sts.

Rep Rows 1-2 for 8 more times.

Inc Row 1 (RS)
K1L, M1L, K1L to last 2 sts, M1L, K1L – 14 (16, 18, 20, 22, 24) long sts.

Rep Row 2.

Inc Row 2
(Extend yarn 2" from LH needle, work K1L in first end furthest from needle, work K1L in chain 1" from first st, work K1L in chain 1" from previous st – 3 sts cast on), K1L to end, extend yarn for 5" from LH needle and fold in half, working through both halves of extension, (K1L in end closest to last st closest to needle, K1L in chain 1" from first st, K1L in folded end of extension – 3 sts cast on) – 20 (22, 24, 26, 28, 30) sts.

Rep Row 2.

Rep Rows 1-2 for 1 (1, 1, 2, 2, 3) more time(s).

Shape Back

Dividing Row (RS)
K1L across 10 (11, 12, 13, 14, 15) sts, slip rem sts to a stitch holder for Front – 10 (11, 12, 13, 14, 15) sts rem.

Rep Row 2.

Rep Rows 1-2 for 2 (3, 3, 3, 3, 3) more times, then Row 1 once.

Bind off.

Shape Front

Row 1 (RS)
With RS facing, join yarn and working across 10 (11, 12, 13, 14, 15) sts from Front stitch holder, K1L to last st, M1L – 11 (12, 13, 14, 15, 16) sts.

Row 2
K1T in each st across.

Row 3
K2togL, K1L in each st across – 10 (11, 12, 13, 14, 15) sts rem.

Row 4
K1T in each st across.

Row 5
K2togL, K1L to last st, M1L – 10 (11, 12, 13, 14, 15) sts.

Row 6
Rep Row 4.

Rep Row 5-6 for 0 (1, 1, 2, 2, 3) time(s).

Bind off.

RIGHT SLEEVE
Work as for LEFT SLEEVE, reversing shaping.

FINISHING

Block pieces to measurements. Sew bind-off rows of each SLEEVE together for center of Back. Sew button on to Neck edge of Left Front. Push button through sts for buttonhole. Weave in ends.

My First Amazon Customer Review!

Thanks L.I. LINDA for your support!

 

Most Helpful Customer Reviews

5.0 out of 5 stars knit fun February 17, 2012

By L.I. LINDA

I am surprised that there are no reviews for this site.Marla's pattern offerings are wonderful.This blog is a delight for novice and experienced knitters alike.

 

So Soft Cabled Scarf

With winter on the way, now is the time for knitting up a warm, cozy, cabled scarf. This pattern for Tahki Yarns will keep you snuggled up even in the coldest weather!

SIZE One Size

MATERIALS • 3 balls Tahki Yarns JUNO, 97% alpaca, 3% nylon (1.75oz/50g; 84yds/77m) in color #05 charcoal

• One pair size 11 (8mm) needles OR SIZE TO OBTAIN GAUGE

• Cable needle (cn)

• Yarn needle

KNITTED MEASUREMENTS

Scarf Width
7"/18cm

Scarf Length
62"/157.5cm

GAUGE
12 sts and 18 rows = 4"/10cm in Stockinette stitch

TAKE TIME TO CHECK GAUGE

SPECIAL ABBREVIATIONS

1/1 LC Slip 1 st to cn and hold in front, k1, then k1 from cn.
1/1 RC Slip 1 st to cn and hold in back, k1, then k1 from cn.
4/4 LC Slip 4 sts to cn and hold in front, k4, then k4 from cn.
4/4 RC Slip 4 sts to cn and hold in back, k4, then k4 from cn.

SCARF Cast on 28 sts.

Row 1 (WS) P3, [k2, p2] to last st, p1.
Rows 2 and 4 Slip 1, [k2, p2] to last 3 sts, k3. Row 3 Slip 1, [p2, k2] to last 3 sts, p3.
Rows 5, 9 and 13 Slip 1, p4, k1, p16, k1, p5.
Rows 6, 10 and 14 Slip 1, k4, p1, k16, p1, k5. Rows 7, 11 and 15 Slip 1, p1, k4, p16, k4, p2.
Row 8 Slip 1, 1/1 LC, k2, p1, 4/4 RC, 4/4 LC, p1, k2,
1/1 RC, k1.
Rows 12 and 16 Slip 1, 1/1 LC, k2, p1, k16, p1, k2,
1/1 RC, k1.Rep Rows 5-16 until piece measures 61" from beg, end with WS row.
Rep Rows 2-3 twice.
Bind off in pattern.
FINISHING
Weave in ends.